Suntour Cyclone
![]() |
![]() Suntour Cyclone Derailleurs US $110.00
|
![]() Suntour Cyclone Road Bike Rear Derailleur 6 Speed US $99.00
|
![]() Suntour Cyclone 160mm crank rivendell sugino US $130.00
|
![]() NOS Suntour Cyclone Sprint Levers6 Spd Index Capable US $59.99
|
![]() Vintage 1st Generation Suntour Cyclone Rear Derailleur Short Cage US $60.00
|
![]() NOS Vintage Suntour Cyclone Brake Levers Non aero US $49.99
|
![]() NOS NIB Suntour CYCLONE MARK II FRONT DERAILLEUR US $16.00
|
![]() Vintage Suntour Front Hub Quick Release Lever QR Skewer Cyclone Superbe Pro US $15.50
|
![]() VINTAGE SUNTOUR CYCLONE REAR DERAILLEUR US $15.00
|
![]() Vintage Suntour Cyclone Mk II rear derailleur US $12.99
|
![]() NOS Suntour CYCLONE BRAKE LEVERS US $11.50
|
![]() Suntour Cyclone 130 BCD Chainrings 42 53 US $10.00
|
![]() NOS NIP Suntour CYCLONE FRONT DERAILLEUR US $9.99
|
![]() Suntour Cyclone Down Tube Shifter Key Chain US $8.99
|
![]() SunTour Cyclone Clamp On Shifters Classic Road Touring Downtube Friction NOS US $7.50
|
![]() Suntour Cyclone Cage Tension Screw For Rear Derailleur US $2.40
|
![]() Suntour Cyclone Cage Washer For Rear Derailleur US $1.95
|
![]() Suntour Mounting Nut For Rear Derailleur Cyclone II US $1.80
|
![]() Suntour Cyclone Pulley Connect Nut For Rear Derailleur US $1.80
|
![]() Suntour Cyclone Roller Pin For Front Derailleur US $1.80
|
![]() Suntour Cyclone Cage Stop Pin For Rear Derailleur US $1.40
|
![]() Suntour Cyclone Nut For Shift Levers US $1.30
|
![]() Suntour Cyclone Clip For Front Derailleur US $1.20
|
![]() Suntour Cyclone Cage ExtensionBolt For Front Derailleur US $1.00
|
![]() Suntour Cyclone Front Deraileur Braze On US $.99
|
![]() Suntour Cyclone ll Front Derailleur clamp 286 Shimano Sram Campagnolo Dbl US $.99
|
![]() Suntour Cyclone Pedals US $.10
|
is this bike frame strong enough?
i took a 1999 schwinn cruiser six and turned it into a clunker (pioneer mtb) and i want to know if the frame is strong enough to withstand some intermediate off roading.
its the typical schwinn thick walled thin, tubed high tensile steel with a modern TIG weld.
also, it currently has an RST 1 1/8" thread-less suspension fork, a 10 speed drive train from a '74 schwinn varsity with a suntour cyclone rear derailleur, ukai 26X2.125 rims, and suntour XC high flange hubs
"thick wall thin" means that walls of the frame tubes are thick, but the tube itself is small (around 1")
no way to know
ride it
if it breaks, quit
what does this mean
"thick walled thin", ?
i doubt it was designed specifically for strength or jumping
wle
The Headbadge: Zeus 2000 RD shifting / operational characteristics
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.


US $299.00


















































Comments are closed.